Bass Pro Gunsmith Shop

Gunsmith Shop - Springfield, MO

Do you have a firearm that is malfunctioning or maybe you inherited an heirloom piece that you are unsure of its value, reliability or safety? Bass Pro Shops Outdoor World has a full service gunsmith shop that can provide almost every service that one may need.

Restoration of metal or wood parts are available as well as customization of most firearms including revolvers and pistols. Gun bluing, case hardening, checkering and many other services are provided by our very experienced staff has a vast knowledge of weapon repairs.

Complete firearm inspection and repair may be made by bringing your firearm to the shop which is located in the lower floor in the Camping Department.

Comments for Bass Pro Gunsmith Shop

Name: Donald Smith
Time: Wednesday, May 2, 2012

Need sights changed on Kimber 1911 ,I have the new sights from Kimber. Thank you

Name: Bradley Phelps
Time: Sunday, August 19, 2012

I have a choke that is stuck in my Browning A500. How much would it be to remove it?

Time: Monday, September 17, 2012

I have a Taurus 38 specialM85 purchased there at BP 1/25/12,I had it camo'd from a private party here close to home and cyl stop spring was not reinstalled correctly. How much to fix it up for me? Thanks Mark

Name: D McAdoo
Time: Thursday, October 11, 2012

Just acquired a Rem m 7400 that has a decelerator pad. What would it cost to have this stock shortened about 1/2" and the pad reinstalled? Also, since it's so late in the season, what about a timeline for this? Ball park figure is ok, just want some idea to see if the gain in convenience is worth the cost. Thanks

Name: John Linza
Time: Friday, November 9, 2012

I have a Remington model 700 CDL Boone & Crocket 7mm rem mag. I have had a problem with ejecting empty shells after I shot. This problem has been present from the first shot from the rifle. I looked into it localy and was told that it could possibly be a bent chamber from the factory and that they had seen it before. He told me the only way to correct it is to replace the barrel. Is that true and would remington correct this for me? Thanks

Name: Louis Ziolkowski
Time: Monday, December 17, 2012

I screw up timing between sears by removing to much metal where secondary sear engages trigger can your handle this
Thank you very much

Name: Chad Nunnery
Time: Tuesday, December 25, 2012

I have a Remington 870 12 gauge i got it last winter and for some reason it doesnt eject spent shells. How much would it be to fix?

Name: Roger
Time: Saturday, January 12, 2013

I have a remington nylon 66 not sure of the year has a little surface rust on the barrle and is missing the trigger trigger guard the action cover and maybe other parts was wanting to know if it could be repaired

Name: Mike Ricciardi
Time: Wednesday, March 27, 2013

I needs to have my Ruger P85 sighted in.Is that something that you can do?and approx cost.
Thank You

Name: Tony lawson
Time: Wednesday, April 17, 2013

Can you turn and install muzzle brakes on TC contender pistol

Name: Deryl Cooley
Time: Monday, September 23, 2013

What would you charge for a colonial arms modified choke tube installed in a H&R 410 shingle shot shotgun

Name: Larry Lack
Time: Tuesday, November 12, 2013

I have a Bushmaster Carbon 15. When chambering a round, sometimes the bolt will not completely close and lock, and when it does fully lock, at times it is really hard to get it to unlock to eject the round. I have checked to make sure that the star chamber is clean and i can not see any build-up. The rifle has not had many rounds shot through it, maybe a box. Any idea as to why it would behave as it is, and what could I do to remedy this problem?

Name: Chris
Time: Thursday, January 23, 2014

I'm looking to get my maverick 88 receiver drilled and tapped to attach a picatinny rail and was wondering if that is something the gunsmiths could do and what a cost estimate would be? I live near the Springfield MO location

Name: Evan
Time: Monday, January 27, 2014

Can you do matte finish bluing?

Thank you

Name: darren
Time: Tuesday, January 28, 2014

I have an M&P shield and I'd like to have XS Sight System sights installed. How much do you charge to install sights. Thank you.

Name: Jim Jacobson
Time: Monday, April 7, 2014

I have an RWS Model 34 Diana that I purchased from Bass Pro Shops about 5 years ago and it has lost its accuracy. It has been thoroughly cleaned, the breech seal has an o-ring in it, but doesn't extend beyond metal breech to make a seal when closed. Placed another o-ring to fill the void, didn't improve accuracy and it wouldn't stay in place when breech opened. Any suggestions?

Name: Shane Gumm
Time: Friday, December 5, 2014

How much would it be to fix my canted front sight post on my Zastava NPAP AK47?

Name: Chris
Time: Monday, December 22, 2014

How much would it be to have truglo night sights installed on my glock 26?

Name: Roger Fillmer
Time: Friday, December 26, 2014

I purchased a Thompson Center Encore from BassPro a few years back. I noticed recently that the walnut butt stock has a hairline crack. Do you sell butt stocks to fit my Encore and what's the price for just the stock? Thanks

Name: Brandon Smith
Time: Thursday, January 8, 2015

Are you able to cut a .330 dovetail in a 1911 in order to accept a Volkmann Battle Hook rear sight and install it?

Name: Edwin Burden
Time: Monday, January 19, 2015

I have a Browning gold 12 GA, Can you install a magazine shut off on this gun. If so about how much would it cost?

Name: Terry Johnson
Time: Sunday, January 25, 2015

cost of converting citori GTI to double release trigger

Name: Curtis Bingle
Time: Friday, March 13, 2015

I own a rem 700 adl with long action/w synthetic stock. Just purchased wood replacement stock. can you install, free float, and glass bed this for me? What would it cost

Name: Shell Buckner
Time: Friday, June 5, 2015

I would like to have a recoil pad installed on a Benelli 12ga. I think I would like a Benelli pad just to keep it all original.
I also need to add about 1-1/4 to the length of pull. Can you get Benelli pads and help me fit it a little better?
Thanks for your help

Name: Kenneth Hicks
Time: Sunday, June 28, 2015

I was given a L C Smith, Hunter One Trigger, Field Grade, 20 gauge. The previous owner said the gun would fire both barrels simultaneously. I had the stock repaired and a local gunsmith attempt to fix the internal issues, unsuccessfully. Can you help Me? Thanks Ken

Name: justin byrd
Time: Monday, September 14, 2015

i have accquired a weatherby mark v deluxe in 7mm magnum but my bolt won't close all the way or rotate i don't think its an extractor but maybe a head spacing problem how much would it cost to get looked at too make sure

Leave a comment